corporationla.blogg.se

Confirm the connection between the operation panel, the scanning unit, and the logic board.

Check the operation of the moving parts (such as purge unit, carriage unit, and paper feeding mechanism) between the logic board and the power supply unit.

If the counter value is 7% or more, also replace the ink absorber kit (QY5-0181) when replacing the logic board ass'y. *1: Before replacement of the logic board ass'y, check the ink absorber counter value (by service test print or EEPROM information print). The RAM error occurred in the RAM check at hard. The check sum value is incorrect in the ROM check On the LCD, "Scanner is not operating correctly." is The scanner unit warming-up is not performed

The scanner unit cannot detect the home position, or The PCI bus error is detected by the ASIC. None of the ink tank position is detected. The carriage did not move up or down properly.Īn error occurred in the AP motor during purgingĪn error occurred in the paper feed motor.Īn error occurred in the paper eject encoder signal. The print head temperature exceeded the specifiedĪ problem occurred in writing to the EEPROM. The ink absorber is supposed to be full.Message on This error takes place when feeding paper from theĪSF after an error occurred in the ASF cam sensor. Note: Ink yield may vary depending on texts/photos printed, applications software used, print mode and type of paperĪn error occurred in the LF encoder signal. Declared yield value determined based on Canon standard method referring to ISO/IEC FCD24712. *2: When printing Canon standard patterns on 4" x 6" Photo Paper Plus Glossy continuously with the default settings of Photo Paper Plus Glossy using Windows XP printer driver in borderless printing mode and Windows XP Photo Printing Wizard. *1: Declared yield value in accordance with ISO/IEC FCD24711. Specified print volume (I) or the years of use (II), whichever comes first.